Our conveyor standards

Slider: Galvanized
Speed Mode: Variable
Drive Type: Head Drive
Drive Location: Left
Drive Version: Version AC (below)
Infeed: Standard
Belting: Blue Belt (460445)
Side Rails: No Side Rails
Stands: Stands with leveling pads
These standards will be highlighted/bold on the form


I understand that this software is provided by Yushin America, Inc. "as is" and any express or implied warranties, including, but not limited to, the implied warranties or merchantability and suitability for a particular purpose are disclaimed.

In no event shall Yushin America, Inc. be liable for any direct, indirect, incidental, special, examplary, or consequential damages (including, but not limited to, procurement of substitute goods or service; loss of use, data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of this software, even if advised of the possibility of such damage.

All applications must be reviewed and confirmed Yushin America, Inc.

This software is designed to be used for budgetary pricing information only.



* Items in bold are Yushin Standards and recommended values.
This is a required field.
This is a required field.
Longer belt options are available, but must be quoted on a case by case basis. Please inquire for a quotation if a longer conveyor is needed.
This is a required field.
This is a required field.
This is a required field.
lbs
This is a required field.
fpm
This is a required field.
This is a required field.
If the application calls for holding product back while the conveyor is still running, please indicate this by selecting "Yes" in the accumulation box.

This information is required in order to properly size the motor.





Continuous
Product is not stopped on a moving belt.


Accumulating
Product hits a dead stop and the belt continues to run under it.



* Items in bold are Yushin Standards and recommended values.
Standard head drive conveyors do NOT allow for reverse operation. If reverse operation is required, please inquire for a quotation.
Allows reverse operation


This is a required field.
The drive location is where the motor mount is located. Left and right are defined as if you are standing behind the conveyor and the product is moving away from you.




Example shown above is Left Below, Discharge.


Example shown above is Right Above, Discharge.

This is a required field.

Version AC (below)
  • Standard end drive
  • Min Length: 310 mm
    • Version AC (above)
  • Maximum 1.5" clearance between motor and belt

    • Version AM
  • Standard offset 325mm from end
  • Min Length: 670 mm
    • Version AU
  • Motor outside of frame
  • Can be mounted below
  • Min Length: 310 mm

    • Version BC
  • Available for Center Drive only

    • This is a required field.


    * Items in bold are Yushin Standards and recommended values.

    Filters

    This is a required field.


    Belts

    Surface
    Belt# Material Color Max Temp[°F] Price Price Notes
    °


    * Items in bold are Yushin Standards and recommended values.
    This is a required field.

    This is a required field.
    mm





    Fixed Side Rail
    Fixed side rails are non-adjustable rails that result in a fixed width between the rails.


    Adjustable Side Rail
    With an adjustable side rail, the usable width and the height can be varied. The following adjustable side rails are available in the next choice box.



    * Items in bold are Yushin Standards and recommended values.


    This is a required field.

    This is a required field.






    Controls

    Standard control with variable speed capability (included with conveyor)

    • Operates off 115 Volt AC line
    • Filtered DC output for cooler motor operation, longer brush life, lower audible noise, and wider speed range
    • NEMA 1 enclosure for environmental protection
    • Trimpots on PC board to adjust torque limit, minimum speed limit, maximum speed limit, acceleration time, and voltage regulation
    • Speed can be adjusted manually using speed pot mounted on enclosure.
    • Toggle switch on enclosure indicates AC power on.
    • Factory installed AC line cable.


    Applicable for Yushin Servo Robots only. If another robot model or robot supplier is used, special quotation is required.

    Conveyor Detection Options


    • 5"x7" Electrical enclosure to mount on conveyor side rail.
    • Keyence sensors inclusive of leads and wiring.



    This is a required field.
    This is a required field.
    This is a required field.
    This is a required field.
    This is a required field.
    This is a required field.
    Quantity 1
    Type
    Drive Version
    Drive Location -hand side (as product travels along belt)
    Drive Drum Drive drum surface is
    Infeed Tail
    Discharge Tail

    Overall Length mm ( in )
    Overall Width mm ( in )
    Support Rolls Conveyor requires belt support roll(s)
    Incline

    Belt N/A Belt#
    This is a , belt.
    Belt Width n.a. mm ( in )
    Slider Bed Belt rides on a Steel Slider

    Product Load lbs
    Accumulation Yes. Product accumulation is allowed No. Product accumulation is NOT allowed

    Speed fpm
    Speed is
    Motor motor
    Motor     Hp
    Speed Control Bodine Speed Control
    115 VAC line input, 130 VDC Output

    Control Options Continuous Run
    Robot Interface Cable and Indexing Option
    Applicable for Yushin Servo Robots only. If another robot model or robot supplier is used, special quotation is required.
    Detection Options None requested
    Sensor Set for 'Drop-Zone Clear' detection
    Additional Sensor Set for 'Conveyor Full' detection

    Side Rails
    mm OAL


    Stands No Stands Quantity:


    Special Notes
    Net Price / ea

    Frame

    Conveyer Width:
    Conveyer Length:
    Sub-Total Price:$

    Support Rolls

    Number of support rolls:
    Price per support roll:
    Sub-Total Price:

    Drive

    Drive Version:
    Drive Location:
    Part#:
    Sub-Total Price:

    Drive Width Vars
    Part#:
    Sub-Total Price:

    Drive Drum
    Part#:
    Sub-Total Price:

    Drive Train
    Sub-Total Price:

    Infeed

    Part#:
    Sub-Total Price:

    Infeed Tail Width Vars
    Part#:
    Sub-Total Price:

    Outfeed

    Part#:
    Sub-Total Price:

    Outfeed Tail Width Vars
    Part#:
    Sub-Total Price:

    Motors

    Load:
    Max Speed:
    Speed Mode:
    Mode of Operations:
    Voltage:

    Motor
    Part#:
    Manufacturer:
    Horse Power: hp
    Output Speed: rpm
    Torque: lb-in
    Sub-Total Price:

    Adapter Plate
    Part#:
    Sub-Total Price:

    Terminal Box
    Part#:
    Sub-Total Price:

    Capacitor
    Part#:
    Sub-Total Price:

    Speed Control
    Part#:
    Sub-Total Price:

    HP Resistor
    Part#:
    Sub-Total Price:

    Armature Fuse
    Part#:
    Sub-Total Price:

    Belt

    No Belt Selected
    Surface Material:
    Surface Description:
    Surface Color:
    Max Temp[°F]:
    Notes:
    Belt Width: n.a. mm ( in )
    Belt Width: n.a. mm ( in )
    Sub-Total Price:

    Rail System

    Rails:
    Sub-Total Price:

    Stand System

    Stand Type:
    Height:
    Base Price:
    Quantity:
    Sub-Total Price:

    Floor Mounting Brackets
    Base Price:
    Quantity:
    Sub-Total Price:


    Casters
    Base Price:
    Quantity:
    Sub-Total Price:

    Stringers
    Base Price:
    Mtg Price:
    Quantity:
    Sub-Total Price:

    Accessories

    () : *
    Sub-Total Price:

    Pricing Scheme

    Price Increase
    Base Price:
    Price Increase:
    Sub-Total Price:
    Price Increase
    Price Increase:
    Sub-Total Price:
    Packaging
    Packaging Price:
    List Price:
    Discount
    Discount Given:
    Yushin Net:

    End Price (without controls)
    Markup:
    Subtotal Price:


    Controls

    No control options
    Addition of robot interface cable and indexing option to above control box
    Sub-Total Price:

    Addition of robot interface cable and indexing option to above control box
    Sub-Total Price:

    Addition of robot interface cable and indexing option to above control box
    Sub-Total Price:


    END PRICE

     



    GUF-P 2000

    Our most popular and versatile conveyor


    Max Load: 250 lbs
    Length: Variable up to 32'
    Widths: 1.96" to 31.5"
    Speeds: Upto 260 fpm
    Frame Height: 1.96"